|Home page||about us|| Products ||News Center||marketing network||Online Q & A||contact us||Recruitment|
Address: Taiping Village, Chunjiang Street, Fuyang District, Hangzhou, Zhejiang Province
A pipe system consisting of two pieces of pipes and joints makes on-site installation and maintenance simple, fast and efficient! This new product is a separable conduit Huff-type cable protective sleeve system (referred to as the conduit system) with two tubes and joints connected, which is suitable for field installation and repair of damaged pipelines.
Maintenance pipeline: The catheter can be customized according to the customer's specific length. At the construction site, the catheter is cut according to the needs of the maintenance pipe. The two halves of the catheter are snapped tightly together, and then the damaged tube is tightly connected to the end of the closed tube with a catheter connector. This allows you to repair the damaged wires before repairing the damaged pipes. And no special clamps or pliers are needed to hold the tubes together.Fiber optics and other electrical wires can also be placed inside this conduit. Product specifications include Ф50mm, Ф75mm, Ф90mm, Ф110mm, Ф160mm and Ф200mm.
I. Use of Huff cable protection sleeve (also known as separable conduit or conduit) system:
Huff-type cable protection sleeves are mainly used for power / telecommunications cables as protective sleeves. They have many irreplaceable advantages in traditional solid wall pipes. Installation is simple, convenient and fast: wall sleeves save time, labor and labor. . Features are as follows:
1. Install new power / telecom cables
Under normal circumstances, especially in newly developed or rebuilt areas, utility companies need to install shorter cables in the area to service the surrounding buildings. In this case, it is more convenient and simple to wrap the Huff protective sleeve system around the cable or wire than to install other pipes.
2. Repair existing pipeline
Huff-type protective casing systems are mainly used to repair damaged pipes. Pipes installed on the ground may be damaged due to impact or weather: Pipes installed underground may be damaged by trenching / digging equipment.
3.Cover the cable from high altitude to the ground or underground
In many countries, the cables installed by utilities (electricity or telecommunications) on the ground are connected to utility poles. In many new development and reconstruction areas, local governments require utilities to move overhead cables underground. In this case, the utility can dig a trench on the ground and then wrap the protective cable with a Huff protective sleeve before backfilling the trench.
4. Wrapped direct buried power / telecommunications cables
If power or telecommunications cables are already buried underground and not closed pipes, many new developments will cause these cables to be exposed. In the United States, utilities often cover these cables with Huff's protective sleeve system if necessary.
5. Wrapped power / telecommunications cables on the bridge
One of the most common uses for Huff protective sleeve systems is to coat electrical or telecommunication cables on bridges. Conduit is suitable for installing new bridge cables or repairing and replacing pipes on existing bridges. In some developed countries, local governments and businesses must wrap pipes around electrical and telecommunication cables on the ground. If existing PVC or metal pipes are damaged or begin to rust, utilities need to remove the old pipes and detachable conduit systems around the cables and install them on bridges.
6.Migration for buried power / telecommunications pipelines
Underground cables installed by utilities (electricity over power sector) may need to be moved. Migration may be due to the construction of new buildings or roads, the laying or moving of new cables, etc. In this case, the utility can wrap the cables with conduit to protect the cables in the new location.
7. Wrap the wires along a pole or lamp post
Many electrical and telecommunication cables are connected to utility poles on the ground. In many areas, cables will be transferred from the ground to the ground, or from the ground to the poles on the ground. The surface of a vertically placed cable needs protection. The Huff-type protective sleeve system is the best choice for wrapping power / telecommunications cables perpendicular to poles and lamp posts. Conduit can be used to install new wires or repair existing wires.
8. Power / Wire Cables for Commercial or Industrial Buildings
Conduit is suitable for protecting cables inside or outside commercial and building. This is usually done when electricity or telecommunications services need to be relocated. It can also be used with cables inside the word staircase.
9. OEM application
Catheters can also be used on other products by original equipment manufacturers (OEMs). As an example of one of our customers, a locomotive manufacturer uses a conduit to wrap cables during the manufacturing process; colleagues are still refurbishing. Use existing ducts to protect exposed cables.
10. Covering road or railway power / telecommunications cables
Features of Huff-type cable protection bushing system:
Make the cumbersome casing installation and repair work simple, convenient and efficient!
Flame retardant performance is self-extinguishing;
High comprehensive performance: smooth internal and external surfaces, no rust, no dirt, aging resistance, corrosion resistance, easy construction, flame resistance, high mechanical strength, and wide application
3. Scope of application:
Power cable jacket, cable jacket, telephone cable jacket, cable television jacket, optical fiber jacket
Copyright: Hangzhou Bainuo Power Technology Co., Ltd. Zhejiang ICP No. 15016722